Advice on Mk1's

Whore of Babylon · 30-09-2008, 01:08

Im am currenty selling my mk2 and planing on buying a Outback then a Mk1 in 6 months or so. However i want to make a 200hp 20V AW11 (RPM monster) and i was wondering if anyone had tips and or suggestions on how to do this. im open to the supercharger idea, but i wont turbo it.

Reasons for wanting 20v over 3SG:
Smaller
Eaiser swap
Ceaper
ITB's
and i think theres potential for an exelent road/track car.
The big question: Can i use the 6 speed tranny?

My plans were to buy a n/a aw11 88 or 89 model and pretty much strip it of heavy stuff.

Cheers,
WoB

GregHoon · 30-09-2008, 01:23

I had looked into doing a 20v swap before getting my 1.5 and came across this. I am not sure if you are after help with the swap or help getting it to kick out 200bhp but here you go anyway:

http://www.mr2.com/forums/20v-swaps/...0v-system.html

Hope it is of some help pal.

Greg

Whore of Babylon · 30-09-2008, 03:16

both, thanks for the link very helpful.

30-09-2008, 01:08	#1
Whore of Babylon TB Small Member Join Date: Jul 2007 Location: Tasmania, Aus Posts: 316 Mk2 - 3S-GTE rev3 Collecting parts.	Advice on Mk1's Im am currenty selling my mk2 and planing on buying a Outback then a Mk1 in 6 months or so. However i want to make a 200hp 20V AW11 (RPM monster) and i was wondering if anyone had tips and or suggestions on how to do this. im open to the supercharger idea, but i wont turbo it. Reasons for wanting 20v over 3SG: Smaller Eaiser swap Ceaper ITB's and i think theres potential for an exelent road/track car. The big question: Can i use the 6 speed tranny? My plans were to buy a n/a aw11 88 or 89 model and pretty much strip it of heavy stuff. Cheers, WoB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30-09-2008, 01:23	#2
GregHoon TB Event Coordinator Join Date: Aug 2008 Location: Manchester Posts: 936 Mk1b - 3S-GTE rev1 Swap completed.	I had looked into doing a 20v swap before getting my 1.5 and came across this. I am not sure if you are after help with the swap or help getting it to kick out 200bhp but here you go anyway: http://www.mr2.com/forums/20v-swaps/...0v-system.html Hope it is of some help pal. Greg

30-09-2008, 03:16	#3
Whore of Babylon TB Small Member Join Date: Jul 2007 Location: Tasmania, Aus Posts: 316 Mk2 - 3S-GTE rev3 Collecting parts.	both, thanks for the link very helpful.